Forklift Mini Towable Spreader (IMG-4)
Keep Your Roads and Walkways Safe with a Forklift Towable Spreader
STANDARD FEATURES- Flow of salt regulated to ensure economical usage and spread width
- Agitator mounted in the base of hopper to minimise blockages
- Supplied with both towing eye and ball hitch
- Painted Red
- Large pneumatic tyres
Suitable for use with dry white rock salt only, any other salt will cause blockages
* The colour is only pictorial the actual colour delivered may differ. If colour specific is required,
please ring and we will advise of the stock available.
OPERATION
1. Position the Forklift Truck so that you leave enough room behind the counterweight to operate the safe fitting of the spreader
2. To attach using:• Towing Eye, Lift the tow pin in the counterweight of the forklift truck, position the towing eye on the Spreader into the counterweight slot, and drop the tow pin through the towing eye.
• Ball hitch, Pull the Spreader up to the rear of the towing vehicle, lift and pull the handle on the Ball Hitch and position over the towbar ball and lower, then push the handle down to lock.
3. Ensure that the hopper is vertical by adjusting the hole position in the diagonal adjustable arm (this ensures an even spreading and distribution of salt).
4. Fill the spreader to the desired level with Dry White Salt only
5. Position the flow restriction slide arm to suit level of salt flow required
6. The attachment is now ready for use.
7. Close the flow restriction slide arm when spreading is complete
MAINTENANCE
1. The unit should be inspected weekly for general condition with particular attention paid to:A, All weld points
B, Any damaged components
C, Lock & latches
D, Pivot points
E, The agitator unit is clean and free moving.
F, Both tyres are inflated to the correct PSI.
2. All bolts must be checked for tightness.
3. Ensure unit is kept lubricated around axle base.
4. Damage or failure must be reported and rectified immediately before re-use of the spreader.
5. General surface rusting especially in the critical areas should be treated with proprietary inhibitors, primers and paint regularly.
6. It is advised that when not in use the unit is kept in a sheltered environment.
7. Wash unit down with clean water after each use, paying particular attention to all moving parts for example, the wheels, gearbox and axle.
Suitable for use with dry white rock salt only, any other salt will cause blockages
HEALTH & SAFETY
1. The manager of the department or section where the attachment is to be used must be responsible for ensuring the operators are fully conversant with the attachment, its operation and maintenance.2. Operators must keep clear of the mechanism at all times and especially whilst in operation.
3. When turning corners please ensure that a wide arc is taken to suit the forklift characteristics to prevent the spreader from `Sliding` the corner.
4. If angle adjustment is needed ensure the truck is at a complete standstill and salt-free before adjustments are made.
5. The unit is not suitable for use on public roads; it may only be used on private land.
6. When performing any form of maintenance ensure that the spreader is disconnected from the towing vehicle and the drive wheel is off the ground.
7. Do not stand on the unit if traction is not possible, alternative methods should be explored.
Delivery charges will be calculated at checkout.
Standard delivery is free on all orders to Mainland UK above £100 excluding VAT. Some exclusions apply
1-2 Day delivery is available on stock items only and, where available, charges for 1-2 Day delivery are calculated at checkout. Orders for 1-2 delivery need to be placed by 1:00pm unless otherwise stated.
Delivery dates are estimates only and the company shall not be liable for any loss or damage resulting from any delay in delivery. In particular we shall not be liable for any matter which results from any act of God, war or riot, extreme weather, strikes or any other events which are beyond our control.
The company reserves the right to deliver Goods by installments, each installment being treated as a separate contract.
Goods will be delivered at the point most convenient to our carrier, usually the goods inwards department or reception on the ground floor. Further transfer or installation within the purchasers premises, particularly for large or heavy items, must be arranged prior to delivery and will be charged extra.
Goods are delivered by courier and a signature is required, if the courier is unable to make delivery a card will be left and the goods returned to the depot. Redelivery will usually be attempted on the next working day or arrangements can be made to collect the goods from the delivery depot. It is your responsibility to advise of any special delivery requirements at the time of order.
From time to time our shipping providers make an additional charge for delivery to some areas, for example Northern Ireland and the Scottish Highlands and Islands, in these cases we reserve the right to pass that additional cost on to our customer. We will make contact with you to obtain further payment to cover additional shipping costs, if you do not wish to make the additional payment a full refund will be offered and your order will be cancelled.
RETURN OF GOODS
In the unlikely event of you not being satisfied with any product, please contact us without delay.
Faulty Goods or Incorrect Item Received
Should the goods you receive be faulty or if we have delivered the wrong product you must inform us within 24 hours of receipt (or the next working day), we guarantee to accept return of such goods without charge.
Once we have received the goods at our premises a replacement will be dispatched to you.
Unwanted Goods
If you decide that you wish to cancel your order, you must notify us, in writing, within 7 working days of receipt.
You will be responsible for the cost of returning the goods to us.
The goods must be returned in a completely resalable condition, in the original packaging, complete with all parts and accessories as supplied. For furniture items that are suppied in flat pack form, we may not be able to accept return if the item has been assembled.
It is your responsibility to take reasonable care of the goods. Goods will be inspected before a refund is made. If the goods suffer damage or neglect whilst in your care a claim may be made.
You must decide before ordering if the goods are suitable for your needs.
We cannot accept return of goods that have been made to your particular specifications or manufactured to order as per below delivery status icons. If you are unsure please call 01302 300200.Â
For business customers returns may be subject to a handling/restocking charge not exceeding 25% of the net price of the goods.
